The end of the year is a great time to conduct a full physical inventory count. It\u2019s normally the slowest time of year, plus it puts your business in great shape heading into the next year. You should start planning your annual physical inventory process no later than 12 weeks before the count date. You should also avoid planning around holidays when you know employees will be occupied.<\/p>\n
Three methods for conducting an inventory count<\/p>\n
Bar-Code Readers: This is the most accurate, yet the most expensive, method given the fact that you need a bar code reader and your items\/bins need to be labeled. You also need a software program that can register the counts. The benefit, however, is that your inventory levels are more accurate because human error is greatly reduced.<\/p>\n
Count Cards: These are generally index cards that contain the individual product and bin location. The cards are placed on the shelves or bins before the count begins, so you can go through and count each bin in sequence. This process is relatively quick because the card that records the count is already in the bin. However, each counter also has a supply of blank cards to accurately record discovered or misplaced merchandise. The blank cards should also be printed on brightly colored card stock so parts that need to be moved to a proper location (after your count is completed) can be easily located after your physical count is finished.<\/p>\n
Count Sheets: These are usually letter-sized pieces of paper that list the inventory items to be counted. If you use count sheets, make sure the counters also take into account misplaced material and products not listed, rather than just focusing on only the items listed on their sheets.<\/p>\n
Who should count the inventory?<\/p>\n
If you use the bar-code method, that can be handled by one person. If you use cards or sheets, you should put together two-person counting teams. The teams should consist of an experienced employee, paired with someone with less knowledge. Let the experienced person count and the inexperienced person record. This method will also help your inexperienced employee become more familiar with your merchandise.<\/p>\n
Preparing the stocking area<\/p>\n
Cleaning your stocking area is an extremely important task that gives you the perfect opportunity to make sure that every inventory item is in its proper bin or location and not floating around somewhere else. If you start out with all of your items in the proper place, it\u2019s going to make your counts go much, much faster \u2013 and your quantities more accurate. This can also help you get in the habit of putting your parts in their correct place on a regular basis. In order to help develop this habit, you should clean your stocking area no less than two weeks before the count begins.<\/p>\n
Make sure you have all the necessary supplies needed to conduct your counts in an orderly fashion such as cards, clipboards, pencils, etc.<\/p>\n
Executing the Count<\/p>\n
Step 1: Break up your Counting into Small Groups<\/p>\n
The first step in getting ready to count is to break up your counting into small groups. This eliminates your employees from becoming too overwhelmed at the thought of having to count thousands of parts all at once.<\/p>\n
Step 2: Create a map of your stocking area<\/p>\n
This should include every shelf, bin, drawer, receiving dock, and return area. All of the products in your inventory must be counted for this to be worth your time, and a success.
\nStep 3: Divide your stocking area into counting areas<\/p>\n
Your counters should be assigned to geographic areas, not product lines. This is due to the fact that some parts located between major product lines could be missed. You should consider counting surplus areas and slow-moving products before your scheduled count. If you know that some of your seasonal products aren\u2019t going to sell before your count, get that out of the way first, and make sure you mark the bins and shelves that are pre-counted. This will put a little less stress on your employees when the big count hits.<\/p>\n
A couple other things you should implement into your pre-counting plan:
\n–\tPull all parts out of inventory that are needed for your current service orders.
\n–\tPull or ship everything on order.
\n–\tDon\u2019t move misplaced material while you count.
\n–\tDo not fill orders or receive material during the count process.<\/p>\n
Step 4: Start counting<\/p>\n
When your counters are finished with a small section of bins, let your designated manager verify the counts. It\u2019s best to first start with your items that bring in the most money and are your fastest movers. Focus on these items first, because they are the items that are most likely to contain counting errors. As soon as the counts are verified, enter them into your inventory management system, or spreadsheet.<\/p>\n
After your count is completed, you must print and review discrepancy reports in your inventory management system (if applicable).<\/p>\n
You should also review your whole counting process and document your procedures. Meet with your employees and determine what worked, what didn\u2019t, and what you can change for future counts. This should make your next full physical inventory count run much smoother.<\/p>\n
If you want to break up your counting in the future, you should consider the method of cycle-counting.<\/p>\n
Cycle-Counting<\/p>\n
If you\u2019re looking to ease the burden of conducting the demanding task of an annual inventory count, there\u2019s an alternative and that\u2019s cycle-counting. It\u2019s a method where you take counts of different areas of your inventory spread out over the course of the year. And the best part, it actually makes your inventory more accurate because you are paying attention to specific areas more often, rather than everything as a whole.<\/p>\n
With cycle-counting, you aren\u2019t going to be able to take the time to count inventory items during your busiest times of the year, but there are probably eight solid months out of the year where this is feasible. The best way to conduct your cycle-counting is by using the \u201cRanking Method.\u201d<\/p>\n
The Ranking Method implies that you count your inventory items with the larger number of dollars flowing through your inventory more often than your slower-moving products. You should break your inventory levels, or \u201crankings\u201d like this:
\n–\t\u201cA\u201d rank items (those responsible for the top 80% of sales) count six times per year.
\n–\t\u201cB\u201d rank items (responsible for the next 15% of sales) count three times per year.
\n–\t\u201cC\u201d rank items (responsible for the next 4% of sales) count twice per year.
\n–\t\u201cD\u201d rank items (responsible for the last 1% of sales) and products with no sales count once per year.<\/p>\n
An advantage of cycle-counting is that you can basically put the full task of inventory counting in the hands of your warehouse personnel, which is beneficial for maintaining more accurate counts. <\/p>\n","protected":false},"excerpt":{"rendered":"
The end of the year is a great time to conduct a full physical inventory count. It\u2019s normally the slowest time of year, plus it puts your business in great shape heading into the next year. You should start planning your annual physical inventory process no later than 12 weeks before the count date. You […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"_links":{"self":[{"href":"https:\/\/cmcdllc.com\/index.php?rest_route=\/wp\/v2\/posts\/881"}],"collection":[{"href":"https:\/\/cmcdllc.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cmcdllc.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cmcdllc.com\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/cmcdllc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=881"}],"version-history":[{"count":2,"href":"https:\/\/cmcdllc.com\/index.php?rest_route=\/wp\/v2\/posts\/881\/revisions"}],"predecessor-version":[{"id":1629,"href":"https:\/\/cmcdllc.com\/index.php?rest_route=\/wp\/v2\/posts\/881\/revisions\/1629"}],"wp:attachment":[{"href":"https:\/\/cmcdllc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=881"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cmcdllc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=881"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cmcdllc.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=881"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}